Pre-rinse spray taps Wall-mounted pre-rinse spray tap AG-9/05TD – AiFO

Technical drawing

Pre-rinse spray taps · AiFO

Wall-mounted pre-rinse spray tap AG-9/05TD

Item no. AG-9 · EAN 2010000114117

  • ceramic cartridges
  • braided hose, insulated, reinforced at the ends
  • chrome-plated steel knobs
  • chrome-plated steel spring
  • swivel spout
  • water flow from 9l/min to 15l/min at a pressure of 2 to 4 bar

In brief

  • A wall version of the spray tap with ceramic heads instead of self-lubricating ones.
  • The set includes a swivel spout, a chrome-plated spring and an insulated braided hose.
  • The connection diameter is matched to the water outlets in the wall.
  • Flow rate of 9–15 l/min at 2–4 bar.
Data sheet PDF, p. 39

Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.

Wall-mounted pre-rinse spray tap AG-9/05TD – how to choose the right one

AG-9/05TD is a wall-mounted pre-rinse spray tap built on ceramic heads, with a swivel spout and a chrome-plated spring guiding the hose. The stated flow rate is 9–15 l/min at a pressure of 2 to 4 bar.

A ceramic cartridge shuts the water off with a short turn of the handle and does not need to be forced, so it copes well with being operated with a wet glove. This is the main difference from the twin AG-1/05PFE, which works on self-lubricating heads.

A note when ordering: the connection diameter must be confirmed before the part goes to site – with tapware screwed to the wall, a mistake means reworking the outlets, not changing a gasket.

How to match the tap to the station, the connection and the flow required – we explained it in the selection guide for this category.

Where it works

  • Dishwashing areas with water outlets already in the wall
  • Stations where the working surface adjoins the sink directly
  • Kitchens where the tapware is to be washed down together with the wall, without working around a base
  • Modernisation of a back-of-house area that keeps the existing water point

FAQ

Frequently asked questions

Have not found your answer? Give the station, the connection and what it is for – we will select the tapware.

Ask a question
What connection does this model have?

The connection diameter is worth confirming with an AiFO adviser before purchase, because it determines whether the tap will fit the existing eccentric connectors.

Ceramic or self-lubricating head – which to choose for a dishwashing area?

Ceramic gives a short handle travel and a tight shut-off without pressing, while the self-lubricating version keeps the movement smooth through years of service. At a station operated by changing staff, ceramic tends to work better, because it is harder to overtighten.

Enquiry

We will quote Wall-mounted pre-rinse spray tap AG-9/05TD for your appliance

Give the mounting, the connection and what the station is for – we will reply with a selection and a quote.

B2B shop

Get in touch

We usually reply within 24 working hours.