Technical drawing
Draw-off and column taps · AiFO
Deck-mounted column tap with a mixer AG-P303
Item no. AG-P303 · EAN 2010000056646
- self-lubricating, non-seizing valve cartridges
- chrome-plated steel knobs
- swivel spout
- water flow from 92l/min to 104l/min at a pressure of 3 to 5 bar
- mounting hole Ø46 mm
In brief
- A maximum reach of 300 mm with the medium height of 550 mm.
- A mixer with chrome-plated steel knobs.
- 3/4" thread, Ø46 mm drilling in the worktop.
- Output 92–104 l/min depending on the pressure.
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
Column tap with a mixer (spout L= 300 mm, H=550 mm, 3/4") AG-P303 – how to choose the right one
AG-P303 is a deck-mounted column tap with a mixer, with a 300 mm spout and a height of 550 mm, intended for a 3/4" thread and a Ø46 mm hole. The output range given by the manufacturer is 92–104 l/min at a pressure of 3–5 bar.
Three hundred millimetres of reach with a medium column height is an arrangement for large, flat vessels: the water gets over their centre, and at the same time the pot does not have to be lifted high to slide it under the spout.
A hundred and four litres per minute is, taken straight, fifty litres in under half a minute – provided the pipework holds five bar. At three bar the same container will fill ten-odd per cent more slowly.
How to match the tap to the station, the connection and the flow required – we explained it in the selection guide for this category.
Where it works
- Wide vessels placed directly on the worktop
- Stations where a pot cannot be lifted high
- Large containers filled without being moved
- Work involving repeated filling of large volumes
FAQ
Frequently asked questions
Have not found your answer? Give the station, the connection and what it is for – we will select the tapware.
Ask a questionHow long does it take to fill a large container?
At a flow rate of 92–104 l/min it takes several tens of seconds for every fifty litres. The actual time depends on the pressure at the premises.
How does it differ from AG-P304?
In height only: 550 instead of 650 mm. The spout, the thread, the mounting hole and the output remain unchanged.
Enquiry
We will quote Column tap with a mixer (spout L= 300 mm, H=550 mm, 3/4") AG-P303 for your appliance
Give the mounting, the connection and what the station is for – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.