Technical drawing
Pre-rinse spray taps · AiFO
Deck-mounted pre-rinse spray tap (3/8") AG-D20G
Item no. AG-D20G · EAN 2010000117774
- ceramic cartridges
- stainless, insulated braided hose reinforced at the ends
- chrome-plated steel spring
- water flow from 9 l/min to 15 l/min at a pressure of 2 to 4 bar
- mounting hole Ø35 mm
- spout
- 200 mm
In brief
- The same 200 mm reach as on AG-D20B, a different design variant marked with the letter G.
- Ceramic heads and a stainless braided hose reinforced at the ends.
- A 35 mm mounting cut-out, 3/8 inch connection.
- The installation parameters are the same as for the AG-D20B variant.
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
Deck-mounted pre-rinse spray tap (3/8") AG-D20G – how to choose the right one
AG-D20G is a deck-mounted pre-rinse spray tap with a 200 mm spout, on ceramic heads, with a stainless hose and a chrome-plated spring. The 3/8 inch connection and the 35 mm hole are the same as on the other models in the D series.
Every spout length in the D series comes in two variants, B and G, with the same parameters. If the difference in finish matters in a given project, it is worth confirming with an AiFO adviser before ordering.
From the installation point of view the choice is neutral: the preparation of the worktop, the cut-out diameter and the connection stay the same. It only matters when a kitchen adds tapware to a station that already exists and wants a matching set from a single variant.
How to match the tap to the station, the connection and the flow required – we explained it in the selection guide for this category.
Where it works
- Completing a station where a model from the D series is already working
- Narrow sinks where a longer arm would overshoot the bowl
- Back-of-house areas buying tapware in batches, on a single part number
- Worktops with a 35 mm cut-out and water brought in at 3/8 inch
FAQ
Frequently asked questions
Have not found your answer? Give the station, the connection and what it is for – we will select the tapware.
Ask a questionWhat does the letter G at the end of the part number mean?
The G variant has the same technical parameters as the B variant. For installation purposes they can be treated interchangeably, and the finish is confirmed when ordering.
Will 200 mm be enough over a double-bowl sink?
Usually not. With two bowls the tap stands between them or to the side, so a longer reach is needed – in this series 250 or 300 mm.
Enquiry
We will quote Deck-mounted pre-rinse spray tap (3/8") AG-D20G for your appliance
Give the mounting, the connection and what the station is for – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.