Technical drawing
Pre-rinse spray taps · AiFO
Deck-mounted pre-rinse spray tap (3/8") AG-D30B
Item no. AG-D30B · EAN 2010000147429
- ceramic cartridges
- stainless, insulated braided hose reinforced at the ends
- chrome-plated steel spring
- water flow from 9 l/min to 15 l/min at a pressure of 2 to 4 bar
- mounting hole Ø35 mm
- spout
- 300 mm
In brief
- The longest reach in the series: a 300 mm spout.
- Ceramic heads, a stainless hose reinforced at the ends, a chrome-plated spring.
- The standard Ø35 mm cut-out and a 3/8 inch connection.
- Thirty centimetres make it possible to serve a bowl set away from the mounting point.
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
Deck-mounted pre-rinse spray tap (3/8") AG-D30B – how to choose the right one
AG-D30B is a deck-mounted pre-rinse spray tap with a spout 300 mm long, on ceramic heads, with a stainless braided hose and a chrome-plated spring. The connection is 3/8 inch and the mounting hole diameter is 35 mm.
Three hundred millimetres is the reach for double-bowl sinks and for situations in which the tap has to stand to one side because an extraction hood or a shelf hangs over the bowl. The water then reaches where it is needed, without moving the vessel under the stream.
A long arm has its price, though: it takes up more space above the worktop and is easier to catch when carrying tall containers. If the bowl lies close to the tap, a shorter version from the same series will be more practical.
How to match the tap to the station, the connection and the flow required – we explained it in the selection guide for this category.
Where it works
- Double-bowl sinks served by a single tap
- Stations where the tapware stands to the side, outside the outline of the bowl
- Large bowls for washing GN 1/1 containers and baking trays
- Installations with a shelf or an extraction hood over the sink
FAQ
Frequently asked questions
Have not found your answer? Give the station, the connection and what it is for – we will select the tapware.
Ask a questionWill 300 mm not turn out to be too much?
Sometimes they will. Over a cramped sink the end of the spout then goes beyond the bowl and water drips onto the worktop every time it is turned off. With a bowl narrower than 40 cm it is safer to reach for the 250 mm version.
Does a longer spout reduce the pressure at the outlet?
In this series the flow rate is 9–15 l/min at 2–4 bar regardless of spout length. The pressure at the station depends above all on the installation, not on a dozen or so centimetres of pipe.
Enquiry
We will quote Deck-mounted pre-rinse spray tap (3/8") AG-D30B for your appliance
Give the mounting, the connection and what the station is for – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.