Technical drawing
Pre-rinse spray taps · AiFO
Deck-mounted pre-rinse spray tap (3/8") AG-D30G
Item no. AG-D30G · EAN 2010000117798
- ceramic cartridges
- stainless, insulated braided hose reinforced at the ends
- chrome-plated steel spring
- water flow from 9 l/min to 15 l/min at a pressure of 2 to 4 bar
- mounting hole Ø35 mm
- spout
- 300 mm
In brief
- 300 mm spout, same parameters as AG-D30B.
- Ceramic cartridges and an insulated stainless braided hose.
- A 35 mm mounting hole, 3/8 inch connection.
- The position of the spout has to be planned when the body is installed.
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
Deck-mounted pre-rinse spray tap (3/8") AG-D30G – how to choose the right one
AG-D30G is a deck-mounted pre-rinse faucet with a 300 mm spout, ceramic headworks, a stainless steel hose and a chrome-plated spring. It mounts in a Ø35 mm hole with a 3/8" connection.
The direction of the spout is worth thinking through before the body is screwed down. With an arm of thirty centimetres, a difference of a few degrees at the outlet translates into several centimetres at the end of the spout.
Otherwise the parameters are the same as AG-D30B, so the model fits the same worktop preparation.
How to match the tap to the station, the connection and the flow required – we explained it in the selection guide for this category.
Where it works
- Sinks with a large gap between the tap and the bowl
- Stations for washing transport containers and baking trays
- Kitchens assembling their tapware within one part-number variant
- Installations where the direction of the spout is set once, at the installation stage
FAQ
Frequently asked questions
Have not found your answer? Give the station, the connection and what it is for – we will select the tapware.
Ask a questionHow does AG-D30G differ from AG-D30M?
In equipment: AG-D30M lists a swivel spout. Spout length of 300 mm, ceramic headworks, flow rate and the Ø35 mm hole are the same.
How should the spout be positioned during installation?
The direction is set when the body is tightened in the worktop, before the hoses are connected. It is worth checking dry beforehand whether the end of the arm lands over the middle of the bowl, because a correction after the nut has been tightened means dismantling the whole fixing.
Enquiry
We will quote Deck-mounted pre-rinse spray tap (3/8") AG-D30G for your appliance
Give the mounting, the connection and what the station is for – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.