Heating cord · AiFO
Compressor crankcase heater with a thermostat for Copeland compressors 240V GK-CCT
Item no. GK-CCT · EAN 2010000201329
- fitted with a metal clamp (700 mm) quick and convenient mounting
- the outer metal braiding provides mechanical protection and earthing
- EN 60335 standard, CE certificate
- compliance with Directive 2014/35/EU
- supply voltage
- from 110 V to 400 V
- standard length of the supply cable
- 1000 mm (other lengths on request)
GK-CCT models
- GK-CCT10
- GK-CCT21
- GK-CCT31
- GK-CCT41
- GK-CCT51
- GK-CCT61
- GK-CCT72
Available models and sizes as currently listed in the B2B shop. Non-standard versions are made to order.
In brief
- The GK-CCT is a crankcase heater with a thermostat, matched to Copeland compressors.
- A 700 mm metal clamp wraps around the compressor body without any additional brackets.
- The supply voltage falls within the range from 110 V to 400 V.
- The standard supply lead is 1000 mm; other lengths on request.
Prices and stock levels are in the B2B shop. Heaters made to length and with non-standard terminations are quoted individually.
Compressor crankcase heater with a thermostat for Copeland compressors 240 V – various models GK-CCT – how to choose the right one
The GK-CCT compressor crankcase heater is intended for Copeland compressors and fitted with a thermostat. It is fixed with a 700 mm metal clamp, and the supply voltage covers the range from 110 V to 400 V.
The built-in thermostat sets this model apart from simpler crankcase heaters: switching on and off happens without an external controller, so the circuit on the control panel side is shorter.
The outer metal braid plays a double role here – it protects the lead mechanically and provides earthing. The manufacturer declares compliance with the EN 60335 standard and with Directive 2014/35/EU.
How to choose the type of heater and the power per metre – we explained it in the selection guide for this category.
Where it works
- Copeland compressors in condensing units working outdoors
- Installations where the heater is to work without a separate controller
- Condensing units exposed to long stoppages at low temperature
- Enclosures with a voltage other than 230 V in the heater circuit
FAQ
Frequently asked questions
Have not found your answer? Give the length and where it will be routed – we will select the type of heater and the power.
Ask a questionDoes this heater need a separate thermostat?
No, this model comes with a thermostat. Versions without one require control on the installation side.
Does the heater fit compressors from other manufacturers?
The data sheet is written for Copeland compressors. For Danfoss compressors there is a separate part number, the GK-CA – the fit of the clamp to the body is worth confirming before ordering.
Can the supply lead be ordered longer?
Yes. The standard is 1000 mm, and the manufacturer supplies other lengths on request.
Enquiry
We will quote Compressor crankcase heater with a thermostat for Copeland compressors 240 V – various models GK-CCT for your appliance
Give the length, the voltage and where it will be routed – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.