Technical drawing
Sink mixer taps · AiFO
Mixer tap (3/8") AG-232K
Item no. AG-232K · EAN 2010000101650
- ceramic cartridge
- chrome-plated steel lever
- pull-out spout 1m long
- water flow from 23 l/min to 28 l/min at a pressure of 3 to 5 bar
- mounting hole Ø40 mm
In brief
- The AG-232K spout pulls out on a hose one metre long.
- The mounting hole is Ø40 mm, five millimetres more than in the typical models of this series.
- 3/8 inch connection, ceramic cartridge, chrome-plated steel lever.
- The declared flow rate is 23–28 l/min at a pressure of 3–5 bar.
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
Mixer tap (3/8") AG-232K – how to choose the right one
AG-232K is a 3/8 inch mixer tap with a pull-out spout on a one-metre hose. The reach makes it possible to take the stream beyond the outline of the bowl – to a bucket on the floor, to a boiler or to a vessel that does not fit in the sink. The body requires a Ø40 mm hole.
A metre of hose changes the order of movements at the station. Instead of putting the vessel under the spout, the water is brought to where the vessel already stands, which with large containers saves lifting.
The flow rate of 23–28 l/min is lower than in the models with a rigid spout from the same group. If the tap is primarily to fill rather than rinse, this difference can be an argument against the version with a hose.
How to match the tap to the station, the connection and the flow required – we explained it in the selection guide for this category.
Where it works
- Filling buckets and boilers standing beside the sink
- Washing dishes whose size exceeds the bowl
- Stations where the water has to reach beyond the outline of the worktop
- Areas for washing pots and GN 1/1 containers
FAQ
Frequently asked questions
Have not found your answer? Give the station, the connection and what it is for – we will select the tapware.
Ask a questionWill AG-232K replace a tap with a Ø35 mm hole?
Not without machining. This model requires a Ø40 mm hole, so on replacement it has to be enlarged – in a stainless steel worktop that is feasible, but it calls for the right tool and has to be done before the tapware is fitted.
How does it differ from the AG-232 model?
In the way it is operated. AG-232 has an elbow handle, adapted to being opened with the forearm, while AG-232K is operated with an ordinary lever. The hose, the hole diameter and the flow range remain the same in both versions.
Enquiry
We will quote Mixer tap (3/8") AG-232K for your appliance
Give the mounting, the connection and what the station is for – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.