Technical drawing
Sink mixer taps · AiFO
Wall-mounted mixer tap (spout L=250 mm, 1/2") AG-PA925
Item no. AG-PA925 · EAN 2010000100882
- self-lubricating, non-seizing valve cartridges
- chrome-plated steel knobs
- swivel spout
- water flow from 32l/min to 38l/min at a pressure of 3 to 5 bar
In brief
- A wall-mounted tap with a 250 mm spout and a half-inch connection.
- Control by two handles of chrome-plated steel.
- Self-lubricating, non-seizing valve heads.
- The manufacturer declares an outflow at a level of 32–38 l/min.
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
Wall-mounted mixer tap (spout L=250 mm, 1/2") AG-PA925 – how to choose the right one
AG-PA925 is a wall-mounted mixer tap with a spout 250 mm long and a 1/2 inch connection. It is operated with two chrome-plated handles, the spout swivels, and the manufacturer states a flow rate between 32 and 38 l/min at 3–5 bar.
This spout dimension is the default choice among the three wall-mounted models – it reaches into a typical bowl while not projecting as far over the worktop as the three-hundred-millimetre version. With a standard sink there is usually no need to measure anything twice.
A flow rate above thirty litres per minute makes a difference when filling GN 1/1 containers and pots. For washing the stream can be throttled with the handle, so a high catalogue value rules nothing out.
How to match the tap to the station, the connection and the flow required – we explained it in the selection guide for this category.
Where it works
- Standard single-bowl sinks with a wall supply
- Filling GN 1/1 containers and medium-sized pots
- Dishwashing areas with separate hot and cold water outlets
- Replacing a worn wall-mounted tap of similar reach
FAQ
Frequently asked questions
Have not found your answer? Give the station, the connection and what it is for – we will select the tapware.
Ask a questionWhy is 250 mm so often the choice?
Because it lands in the middle of a typical bowl and does not get in the way over the worktop. The shorter version works well with sinks pushed up to the wall, and the longer one only when two bowls or a vessel standing alongside have to be served.
Can the water be throttled quickly with two handles?
It requires a movement at each of them separately, so it is slower than with a lever. In exchange, the proportion of hot and cold water once selected stays as it is until somebody deliberately changes it.
Enquiry
We will quote Wall-mounted mixer tap (spout L=250 mm, 1/2") AG-PA925 for your appliance
Give the mounting, the connection and what the station is for – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.