Technical drawing
Sink mixer taps · AiFO
Mixer tap (spout L=250 mm, 3/8") AG-MFBS25
Item no. AG-MFBS25 · EAN 2010000086056
- self-lubricating, non-seizing valve cartridges
- chrome-plated steel knobs
- swivel spout
- water flow from 30 l/min to 36 l/min at a pressure of 3 to 5 bar
- mounting hole Ø35 mm
- body
- chrome-plated brass
In brief
- A 250 mm spout in the version with a chrome-plated brass body.
- Self-lubricating valve heads – the manufacturer describes them as non-seizing.
- A 3/8 inch connection and a Ø35 mm mounting hole.
- Declared flow rate 30–36 litres per minute.
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
Mixer tap (spout L=250 mm, 3/8") AG-MFBS25 – how to choose the right one
AG-MFBS25 is a mixer tap with a 250 mm spout, a brass body covered in chrome and two steel handles. The connection is 3/8 inch, the mounting hole 35 mm, and the declared flow rate is 30–36 l/min at 3–5 bar.
Self-lubricating heads are an argument for tapware that can go unused for a longer time. The manufacturer describes them as non-seizing, that is heads which after a period of standstill should not resist on first opening.
A flow rate above thirty litres per minute is higher here than in the single-lever models with the same connection, which state 26–32 l/min. At a filling station, three-eighths therefore need not mean a compromise.
How to match the tap to the station, the connection and the flow required – we explained it in the selection guide for this category.
Where it works
- Sinks with a bowl of typical width
- Draw-off points brought into use irregularly
- Filling vessels on a three-eighths installation
- Stations requiring separate control of both streams
FAQ
Frequently asked questions
Have not found your answer? Give the station, the connection and what it is for – we will select the tapware.
Ask a questionWhat does the term "non-seizing" mean in relation to the heads?
That the valve should not bind after standing for a long time in one position. It is the manufacturer's description and not a measurable parameter, so it is treated as a selection guideline for tapware used intermittently.
Does a 3/8 inch connection limit the flow rate?
In this model not enough for it to decide the choice. The stated 30–36 l/min places it close to the half-inch versions, which declare 32–38 l/min, while keeping the same connection as the rest of the tapware in the back-of-house area.
Enquiry
We will quote Mixer tap (spout L=250 mm, 3/8") AG-MFBS25 for your appliance
Give the mounting, the connection and what the station is for – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.