Technical drawing
Sink mixer taps · AiFO
Mixer tap (spout L=300 mm, 3/8") AG-MS930
Item no. AG-MS930 · EAN 2010000076149
- ceramic cartridges
- chrome-plated steel knobs
- swivel spout
- water flow from 30 l/min to 36 l/min at a pressure of 3 to 5 bar
- mounting hole Ø35 mm
In brief
- The longest spout in the ceramic range: 300 mm.
- Ceramic heads, chrome-plated steel knobs.
- 3/8 inch connection, Ø35 mm mounting hole.
- Output range 30–36 l/min at a pressure of 3–5 bar.
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
Mixer tap (spout L=300 mm, 3/8") AG-MS930 – how to choose the right one
AG-MS930 is a deck-mounted mixer tap with a 300 mm spout, ceramic heads and two knobs. The connection is 3/8", it is set in a hole 35 mm across, and the manufacturer declares 30–36 litres per minute at 3–5 bar.
The longest reach in the range is useful wherever the water has to go beyond the outline of the body – over the second bowl or into a vessel standing on the worktop. The mounting hole itself stays the same as in the shorter versions.
If MS920 or MS925 models are already in the kitchen, this part number matches them in operation and servicing. Staff do not have to get used to a different way of setting the water, and the store does not need a second type of cartridge.
How to match the tap to the station, the connection and the flow required – we explained it in the selection guide for this category.
Where it works
- Two-bowl sinks with a single draw-off point
- Extending a tapware fleet based on the MS9 range
- Filling vessels standing outside the bowl
- Wide wash-up stations in catering kitchens
FAQ
Frequently asked questions
Have not found your answer? Give the station, the connection and what it is for – we will select the tapware.
Ask a questionDoes a longer spout require a different worktop preparation?
No, all three lengths in the range are set in a Ø35 mm hole. Only the reach of the outlet changes, so the decision concerns the geometry of the station, not work on the worktop.
How do you choose the length when the sink has two bowls?
It is worth measuring the distance from the planned mounting point to the centre of the farther bowl. If it exceeds twenty-five centimetres, the three-hundred-millimetre version is the only one in the range that will reach.
Enquiry
We will quote Mixer tap (spout L=300 mm, 3/8") AG-MS930 for your appliance
Give the mounting, the connection and what the station is for – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.