Technical drawing
Monoblock · AiFO
Monoblock for a refrigerated cabinet 400 MB-SZ-MBP-7PLV22/400G
Item no. MB-SZ-MBP-7PLV22 · EAN 2010000194508
- reduced installation, operating and after-sales costs
- fast and easy installation
- ready-made electrical wiring
- evaporator built into the unit, so it takes up no space in the cold room
- automatic evaporation of condensate
- standardised appliance sizes
- construction made using the most modern food-safe materials
- ecological refrigerant gases R290
- forced ventilation
- Cooled volume of the chamber
- 400 l
- Operating temperature range
- -2°C / +10°C
- Power supply
- 230V-50Hz
- Capacity
- 280 W**
- Energy consumption
- 170 W**
- Refrigerant
- R290, 45 g
- Defrost
- hot gas
- Mounting hole
- 435 x 190 mm
- Cooled volume
- 400 l
- Operating temp. range
- -2°C / +10°C
In brief
- Refrigeration version for 400 l with an operating range of –2°C / +10°C.
- Capacity of 280 W** at a consumption of 170 W** – the lowest power draw in the whole family of cabinet monoblocks.
- The R290 charge is 45 g, the smallest of all versions in this series.
- Hot gas defrosting, mounting aperture 435 x 190 mm, power supply 230V-50Hz.
Prices and stock levels are in the B2B shop. Selection for a specific cold room is handled on request.
Monoblock for a 400 refrigerated cabinet (-2°C / +10°C) MB-SZ-MBP-7PLV22/400G – how to choose the right one
MB-SZ-MBP-7PLV22/400G serves a refrigerated cabinet with a volume of 400 l within a range of –2°C / +10°C. The capacity is 280 W** at 170 W** of energy consumption, the refrigerant is R290 with a charge of 45 g, and the mounting aperture measures 435 x 190 mm.
This is the most economical entry in the family of cabinet monoblocks: no other version has such a low declared power draw or such a small refrigerant charge. It follows from combining a small chamber with an operating range in the region of zero.
Despite the positive upper limit, thawing is carried out with hot gas, because the lower setting drops to –2°C. Frost builds up more slowly in this kind of operation than in freezing, but it does not disappear by itself in every break.
How to choose a monoblock for the volume and the mounting location – we explained it in the selection guide for this category.
Where it works
- Compact refrigerated cabinets in back-of-house areas
- Furniture with product requiring a temperature just above zero
- Retail outlets with a small stock of goods
- Installations where low energy consumption counts
FAQ
Frequently asked questions
Have not found your answer? Give the volume and the temperature range – we will select the monoblock.
Ask a questionHow does it differ from the 400 l freezer version?
In the operating range and the energy balance. The freezer version goes down to –20°C and draws 270 W*, while this one stops at –2°C with 170 W** drawn.
Is 45 g of refrigerant a small amount?
It is the lowest value in this family and follows from the size of the circuit. A smaller hydrocarbon charge simplifies the requirements for the installation location, although the installation rules given by the manufacturer always apply.
Does it fit a cabinet with a 510 x 385 mm aperture?
Not without modifying the panel. This index requires a 435 x 190 mm cut-out, the one provided for the 400 l versions.
Enquiry
We will quote Monoblock for a 400 refrigerated cabinet (-2°C / +10°C) MB-SZ-MBP-7PLV22/400G for your appliance
Give the volume, the temperature range and the mounting method – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.