Technical drawing
Adjustable leg · AiFO
Adjustable leg SRW-25KRN RAL7045 grey – 25x25 mm profile
Item no. SRW-25KRN · EAN 2010000208571
- made of PP
- *Value stated for 3 pcs
- Material
- polypropylene PP
- Profile size
- 25x25 mm
- Load* stated for 3 pcs
- 250 kg
- Adjustment
- 20-54 mm
- for profile
- 25x25 mm (≠1, ≠1.2, ≠1.5 mm)
- colour
- grey RAL7045
- load
- 250 kg*
- Load (set of 3)
- 250 kg
In brief
- A polypropylene body – a plastic lighter and cheaper than polyamide, at the same load rating of 250 kg on three pieces.
- Profile size 25 × 25 mm, adjustment 20–54 mm.
- Colour RAL 7045, design protected by law.
- A good choice where repeatability across a large number of pieces matters.
Prices and stock levels are in the B2B shop. Larger quantities and complete sets are quoted individually.
Adjustable leg (25x25 mm) SRW-25KRN RAL7045 grey – REGISTERED DESIGN – how to choose the right one
SRW-25KRN RAL7045 is an adjustable leg made of polypropylene, for a 25 × 25 mm square profile, with a load of 250 kg for a set of three pieces and adjustment travel of 20–54 mm.
Polypropylene behaves differently from polyamide: it is lighter, absorbs less moisture and copes better with contact with cleaning solutions, but it has lower abrasion resistance. On a leg that stands still and is rarely moved, this difference matters little.
It is worth remembering how the plastic behaves at low temperatures, though – polypropylene hardens in the cold, so in freezer rooms a steel adjustment part is the safer bet.
How to match the leg to the profile, the load and the unevenness of the floor – we explained it in the selection guide for this category.
Where it works
- Series furniture installations built from 25 × 25 mm profile
- Rooms where the floor is wet-cleaned
- Frames assembled in batches of several dozen pieces
- Structures with a moderate point load
FAQ
Frequently asked questions
Have not found your answer? Give the profile, the load and the adjustment range – we will select the leg.
Ask a questionPolypropylene or polyamide – which to choose for this profile?
With similar load ratings, the surroundings decide. PP copes better with moisture and chemicals, polyamide is harder and more resistant to abrasion. For a frame standing still, PP is enough.
Can this leg be used in a cold room?
In a cold room at positive temperatures yes. For a freezer room it is worth considering a model with a steel adjustment part, because the plastic becomes more brittle at low temperatures.
Enquiry
We will quote Adjustable leg (25x25 mm) SRW-25KRN RAL7045 grey – REGISTERED DESIGN for your appliance
Give the profile size, the load and the adjustment range you need – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.