Technical drawing
Adjustable leg · AiFO
Adjustable leg SRW-3KRN RAL7040 grey – 30x30 mm profile
Item no. SRW-3KRN · EAN 2010000203514
- made of PP
- The design is protected by intellectual property law
- Material
- polypropylene PP
- Profile size
- 30x30 mm
- Load* stated for 3 pcs
- 380 kg
- Adjustment
- 20-55 mm
- for profile
- 30x30 mm (≠1, ≠1.2, ≠1.5 mm)
- colour
- grey RAL7040
- load
- 380 kg (Value stated for 3 pcs)
- Load (set of 3)
- 380 kg
In brief
- Height set within a band from 20 to 55 mm, that is 35 mm of movement.
- Polypropylene for a 30 × 30 mm profile, load of 380 kg for three pieces.
- The RAL 7040 shade – a cool, medium grey.
- A design covered by intellectual property protection.
Prices and stock levels are in the B2B shop. Larger quantities and complete sets are quoted individually.
Adjustable leg (30x30 mm) SRW-3KRN RAL7040 grey – REGISTERED DESIGN – how to choose the right one
SRW-3KRN in the RAL 7040 version is a polypropylene adjustable leg for a 30 × 30 mm square profile. The load rating for a set of three pieces is 380 kg, and adjustment covers a band of 20–55 mm.
The lower limit of 20 mm is valuable here in installations with a plinth. A plinth usually covers the leg only up to a certain height, and if the leg does not go low enough, a gap opens up between its base and the floor that is hard to close with anything that looks right.
The upper 55 mm in turn gives headroom for the opposite situation – when the appliance has to be raised to line it up with the neighbouring module.
How to match the leg to the profile, the load and the unevenness of the floor – we explained it in the selection guide for this category.
Where it works
- Installations with a plinth masking the base
- Modules assembled into runs with a common worktop height
- 30 × 30 mm frames in cool grey colours
- Structures serviced without dismantling the furniture
FAQ
Frequently asked questions
Have not found your answer? Give the profile, the load and the adjustment range – we will select the leg.
Ask a questionHow do you match the leg height to the height of the plinth?
It is set so that the plinth overlaps the leg with a little to spare even after levelling. The 20–55 mm range usually falls within typical furniture plinth heights.
Do the SRW-3KRN colour variants differ in anything but colour?
Structurally they are the same. It is worth comparing samples, though, because the three greys on offer differ enough for the discrepancy to show on a single piece of furniture.
Enquiry
We will quote Adjustable leg (30x30 mm) SRW-3KRN RAL7040 grey – REGISTERED DESIGN for your appliance
Give the profile size, the load and the adjustment range you need – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.