Technical drawing
Adjustable leg · AiFO
Adjustable leg SRW-3KRN RAL7045 grey – 30x30 mm profile
Item no. SRW-3KRN · EAN 5900000000954
- made of PP
- The design is protected by intellectual property law
- Material
- polypropylene PP
- Profile size
- 30x30 mm
- Load* stated for 3 pcs
- 380 kg
- Adjustment
- 20-55 mm
- for profile
- 30x30 mm (≠1, ≠1.2, ≠1.5 mm)
- colour
- grey RAL7045
- load
- 380 kg (Value stated for 3 pcs)
- Load (set of 3)
- 380 kg
In brief
- A fit for three profile wall thicknesses: 1 mm, 1.2 mm and 1.5 mm.
- The material is polypropylene, profile 30 × 30 mm, colour RAL 7045.
- Load rating of 380 kg for a set of three pieces, travel 20–55 mm.
- No need to establish the sheet thickness before ordering.
Prices and stock levels are in the B2B shop. Larger quantities and complete sets are quoted individually.
Adjustable leg (30x30 mm) SRW-3KRN RAL7045 grey – REGISTERED DESIGN – how to choose the right one
SRW-3KRN RAL7045 is a polypropylene leg for a 30 × 30 mm profile with a load of 380 kg for three pieces and adjustment of 20–55 mm. The manufacturer declares a fit for profiles with walls from 1 to 1.5 mm.
In refurbishments and servicing this feature solves a real problem. Frames welded in different years are sometimes built from material of a different thickness, despite an identical external dimension, and as-built documentation is usually long gone. A single index then covers the whole fleet of appliances.
The RAL 7045 shade is the darkest of the three greys in this family, so where the leg is visible from the front it gives a quieter effect than the light 7035.
How to match the leg to the profile, the load and the unevenness of the floor – we explained it in the selection guide for this category.
Where it works
- Servicing frames of unknown wall thickness
- Topping up legs in appliances from different years
- Technical installations in a darker grey
- Workshops servicing equipment from many manufacturers
FAQ
Frequently asked questions
Have not found your answer? Give the profile, the load and the adjustment range – we will select the leg.
Ask a questionWhat happens when the leg meets a profile with a thinner wall?
The opening of the profile is then larger and the seating looser. This model covers a range from 1 to 1.5 mm, though, which takes in practically all typical structural material.
Is the leg suitable for a rectangular 30 × 40 mm profile?
No. The seating was designed for a 30 × 30 mm square; in a rectangle the leg will bear on only two walls and will not hold.
Enquiry
We will quote Adjustable leg (30x30 mm) SRW-3KRN RAL7045 grey – REGISTERED DESIGN for your appliance
Give the profile size, the load and the adjustment range you need – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.