Technical drawing
Adjustable leg · AiFO
Adjustable leg SR-50x50PI black – 50x50 mm profile
Item no. SR-50x50PI · EAN 2010000065099
- made of black plastic, adjustable part of stainless steel AISI-304
- Colour
- black
- Material
- plastic/stainless steel
- Profile size
- 50x50 mm
- Load* stated for 3 pcs
- 400 kg
- Height adjustment
- 51 - 109 mm
- Load (set of 3)
- 400 kg
In brief
- The largest profile covered in this line-up: 50 × 50 mm.
- Adjustment from 51 to 109 mm – the highest setting in the whole category.
- Load rating of 400 kg for a set of three pieces.
- A plastic body, adjustment part in AISI-304 stainless steel.
Prices and stock levels are in the B2B shop. Larger quantities and complete sets are quoted individually.
Adjustable leg (50x50 mm) SR-50x50PI black – how to choose the right one
SR-50x50PI is a black adjustable leg for a 50 × 50 mm square profile, with an adjustment part in AISI-304 stainless steel. It carries 400 kg on three pieces, and the height is set within a band from 51 to 109 mm.
The lower limit of 51 mm is the distinguishing feature – this leg will go no lower, so it has to be allowed for as early as the worktop height design. In return it raises the structure to almost eleven centimetres, which no other model in this line-up offers.
Such a clearance matters in practice where a mop, a hose or a jet of water has to pass under the appliance when the floor is washed. Cleaning under furniture standing three centimetres above the floor is in practice impossible.
How to match the leg to the profile, the load and the unevenness of the floor – we explained it in the selection guide for this category.
Where it works
- Appliances that need clearance for cleaning underneath
- Structures on a massive 50 × 50 mm profile
- Installations above a floor with a linear drain
- Stations where the zone at floor level has to stay accessible
FAQ
Frequently asked questions
Have not found your answer? Give the profile, the load and the adjustment range – we will select the leg.
Ask a questionCan this leg be set lower than 51 mm?
No, that is the structural lower limit. If the installation has to stand lower, a model with a different range has to be found – in this profile the alternative is the polyamide SR-5RN from 28 mm.
Who needs 109 mm of clearance under an appliance?
Mainly so that the floor under the furniture can be washed without moving it. In many plants that is quite simply a condition of keeping the production area clean.
Enquiry
We will quote Adjustable leg (50x50 mm) SR-50x50PI black for your appliance
Give the profile size, the load and the adjustment range you need – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.