Technical drawing
Adjustable leg · AiFO
Threaded adjustable leg SR-M25-M16x100
Item no. SR-M25-M16x100 · EAN 2010000143391
- thread made of stainless steel
- foot made of hardened rubber
- Material
- stainless steel/hardened rubber
- Thread size
- M16
- Thread length
- 100 mm
In brief
- Thread size M16 at a stem length of 100 mm.
- Stem of stainless steel, foot of hardened rubber.
- The part number describes one specific version, with no size varieties.
- The socket in the structure has to be of the same size – this leg will not go into an M12.
Prices and stock levels are in the B2B shop. Larger quantities and complete sets are quoted individually.
Threaded adjustable leg (M16x100 mm) SR-M25-M16x100 – how to choose the right one
SR-M25-M16x100 is a screw-in leg with an M16 thread 100 mm long, with a stainless steel stem and a foot of hardened rubber. M16 is a thick thread, used where the leg is screwed into a nut welded into the frame rather than directly into the thin wall of a profile.
A hundred millimetres of stem gives a large reserve when screwing in. How much of it stays outside depends on the depth of the socket: part of the length has to remain screwed in so that the joint works securely and does not rock under load.
Unlike catalogue items covering many models, this part number denotes one version with the dimensions given. When ordering there is therefore no need to add the size or the material version.
How to match the leg to the profile, the load and the unevenness of the floor – we explained it in the selection guide for this category.
Where it works
- Heavy bases and frames with an M16 nut welded into the structure
- Appliances set high above the floor, where a long stem is needed
- Wet installations that require a stainless steel stem
- Structures designed from scratch, in which the socket is matched to the leg
FAQ
Frequently asked questions
Have not found your answer? Give the profile, the load and the adjustment range – we will select the leg.
Ask a questionWill M16 fit a socket prepared for a different thread?
No. The thread has to match in size – otherwise either the stem will not go in, or it will be loose in the socket. If the structure is already finished, we match the leg to the existing nut, not the other way round.
Who needs a stem 100 mm long?
To raise the appliance high enough for the floor to be washed underneath it, and to leave a reserve for screwing into a deep socket. A shorter stem simply will not reach in such an installation.
Enquiry
We will quote Threaded adjustable leg (M16x100 mm) SR-M25-M16x100 for your appliance
Give the profile size, the load and the adjustment range you need – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.