Technical drawing
Adjustable leg · AiFO
Adjustable leg with stainless thread, Allen key adj. SRW-MF-M10x45G INOX
Item no. SRW-MF-M10x45G · EAN 2010000205181
- feet made of high-density HDPE
- version G - with adjustment by Allen key on the thread
- version INOX - thread made of stainless steel
- adjustment by Allen key on the foot as standard
- Colour
- black
- Material
- foot - HDPE
- Thread material
- stainless steel
- Thread size
- M10
- Thread length
- 45 mm
In brief
- M10 thread of stainless steel, 45 mm long; foot of HDPE in black.
- The letter G in the part number denotes adjustment with an Allen key from the thread side.
- Allen key adjustment at the foot is standard here, so the height is set from two sides.
- The same model also comes in an OC version with a thread of galvanised steel.
Prices and stock levels are in the B2B shop. Larger quantities and complete sets are quoted individually.
Adjustable leg with a stainless steel thread (M10x45 mm) Allen-key adjustment SRW-MF-M10x45G INOX – how to choose the right one
SRW-MF-M10x45G INOX is a leg with a foot of high-density polyethylene and an M10 stem of stainless steel, 45 mm long. The height is set with an Allen key, and in the G version also from above, through the thread – without bending down under the appliance.
Adjustment from above makes sense where the foot can no longer be reached once the equipment is in place. In a continuous installation, where appliances stand one beside another, it is sometimes the only way to make a correction without pulling a unit out of the row.
HDPE does not corrode and is lighter than steel, and the stem in this version is stainless – both parts of the leg therefore withstand contact with moisture. The short, 45-millimetre thread intends it for structures standing low above the floor.
How to match the leg to the profile, the load and the unevenness of the floor – we explained it in the selection guide for this category.
Where it works
- Continuous installations in which access to the foot disappears once the equipment is in place
- Furniture and appliances with a shallow M10 socket
- Structures that need corrections to the setting after installation
- Damp surroundings, where a galvanised stem is not enough
FAQ
Frequently asked questions
Have not found your answer? Give the profile, the load and the adjustment range – we will select the leg.
Ask a questionHow does the G version differ from the version without that letter?
In where the Allen key is turned from. The letter G adds a key socket on the thread, that is access from above. Adjustment from the foot side works in both versions.
What does the INOX suffix on this part number mean?
That the stem is made of stainless steel. Its counterpart is the OC version, in which the same model gets a stem of galvanised steel – cheaper, but less tolerant of water.
Enquiry
We will quote Adjustable leg with a stainless steel thread (M10x45 mm) Allen-key adjustment SRW-MF-M10x45G INOX for your appliance
Give the profile size, the load and the adjustment range you need – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.