Honeycomb · AiFO
Honeycomb (1500x60x20 mm) black KP-PLASTER3.0B 1500x60x20
Item no. KP-PLASTER3.0B · EAN 2010000135549
- used in refrigeration appliances to obtain a laminar air flow
- Material
- polycarbonate
- Colour
- black
- Hole diameter [mm]
- fi3.0 mm
- dimensions (AxBxC)
- 1500x60x20 mm
- temperature range
- -40°C / +110°C
- Hole diameter
- Ø3,0 mm
In brief
- The longest strip in the range – 1500 mm – at a width of just 60 mm.
- Ø3.0 mm holes and a thickness of 20 mm, i.e. a fine grid on a shallow cross-section.
- Black version; the same dimension is also available in grey.
- Polycarbonate operating from -40°C to +110°C.
Prices and stock levels are in the B2B shop. Honeycomb panels are cut to size, non-standard parts are quoted individually.
Honeycomb (1500x60x20 mm) black KP-PLASTER3.0B 1500x60x20 – how to choose the right one
KP-PLASTER3.0B is a black honeycomb strip, 1500 × 60 × 20 mm, with Ø3.0 mm perforation, made of polycarbonate with an operating range of -40°C / +110°C.
Sixty millimetres of width is the dimension of a rail, not a duct. The element fits into the narrow gap without any lengthwise cutting, and a metre and a half of length covers a longer display case than any other ready-made strip in this group.
Fine holes on a shallow cross-section straighten the airstream over a short distance. This is a solution for places where the construction leaves no depth – it's compensated for by the density of partitions.
How to match a drain to the hole and a honeycomb to the cabinet – we explained it in the selection guide for this category.
Where it works
- Narrow air supply rails in counters and display cases
- Cabinets up to 1500 mm long handled by a single section
- Modernisations with no possibility of deepening the duct
- Installations with a dark interior, where the insert should be invisible
FAQ
Frequently asked questions
Have not found your answer? Give the hole diameter and the thread – we will select the drain and the trap.
Ask a questionHow does it differ from the grey equivalent of this dimension?
Only in the colour of the material – the geometry, perforation and temperature resistance are shared. Black is chosen when the gap is visible and needs to be visually closed off.
Can shorter sections be cut from this strip?
Yes, it is cut crosswise to the required length. However, there is no allowance in width: sixty millimetres is the target dimension, not material for further division.
Enquiry
We will quote Honeycomb (1500x60x20 mm) black KP-PLASTER3.0B 1500x60x20 for your appliance
Give the hole diameter, the thread or the dimensions of the cabinet – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.