Honeycomb · AiFO
Dark grey honeycomb panel KP-PLASTER 4.8
Item no. KP-PLASTER · EAN 2010000138120
- used in refrigeration appliances to obtain a laminar air flow
- Material
- polycarbonate
- Colour
- dark grey
- Hole diameter [mm]
- fi4.8 mm
- dimensions (AxBxC)
- 2000x1000x20 mm, angle: 70°
- temperature range
- -40°C / +110°C
- Hole diameter
- Ø4,8 mm
In brief
- The largest sheet in the range: two metres by one metre, 20 mm thick.
- Dark grey – midway between standard grey and black.
- Ø4.8 mm holes, 70° angle.
- Polycarbonate with an operating range from -40°C to +110°C.
Prices and stock levels are in the B2B shop. Honeycomb panels are cut to size, non-standard parts are quoted individually.
Honeycomb (2000x1000x20 mm, 70°) dark grey KP-PLASTER 4.8 – how to choose the right one
KP-PLASTER 4.8 in the 2000 × 1000 × 20 mm format is a dark grey polycarbonate honeycomb sheet with Ø4.8 mm perforation and a 70° angle. It is used to even out the airflow in refrigeration equipment.
A surface area of two square metres is the most material from a single piece that we carry. For orders covering an entire line of cabinets, cutting from such a large sheet leaves fewer offcuts than assembling inserts from several smaller sheets.
The dark grey shade and the 70° angle are two features unique to this item. When choosing a substitute, you therefore need to reckon that the nearest items differ either in colour or in edge geometry.
How to match a drain to the hole and a honeycomb to the cabinet – we explained it in the selection guide for this category.
Where it works
- Orders for a full set of inserts for several units at once
- Cabinets wider than 1250 mm, cut from a single piece
- Series production where cutting efficiency matters
- Installations chosen to match a dark grey shade
FAQ
Frequently asked questions
Have not found your answer? Give the hole diameter and the thread – we will select the drain and the trap.
Ask a questionIs the two-metre sheet cut before shipping?
At this format, transporting it whole can be awkward, so we set the target dimension at the time of ordering. Give the lengths of the sections you need, and we will prepare the cutting for them.
What does the 70° angle mean on this sheet?
The 70° angle concerns the geometry of the edge; among the ready-made formats only the 1250 × 150 × 30 mm strip also has it. If you are reproducing an existing insert, send the measurement from the unit – we will match the element to the actual edge.
Enquiry
We will quote Honeycomb (2000x1000x20 mm, 70°) dark grey KP-PLASTER 4.8 for your appliance
Give the hole diameter, the thread or the dimensions of the cabinet – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.