Honeycomb · AiFO
Item no. KP-PLASTER6.2 · EAN 2010000024195
In brief
Prices and stock levels are in the B2B shop. Honeycomb panels are cut to size, non-standard parts are quoted individually.
Honeycomb panel KP-PLASTER6.2, sized 2000 × 1000 × 20 mm, is a grey polycarbonate sheet with Ø6.0 mm holes, designed to straighten the air supply in refrigeration equipment.
Six-millimetre channels at a twenty-millimetre depth are the freest passage found in this family. Air passes through it most freely, and the insert places the least load on the fan.
In the large format, this solution makes sense for cabinets with an extensive air supply layout, where the airstream is straightened over a longer section of duct, and the panel's main job is not to restrict the flow.
How to match a drain to the hole and a honeycomb to the cabinet – we explained it in the selection guide for this category.
Where it works
FAQ
Have not found your answer? Give the hole diameter and the thread – we will select the drain and the trap.
Ask a questionThe symbol 6.2 describes the perforation size, not the commercial form. Under it you'll find both the full two-metre sheet and the trimmed 730 × 55 mm strip; when placing an order, the stated dimension is what counts.
Fewer partitions mean fewer points guiding the air, so the effect is gentler than with Ø3.0 mm. This is offset by the insert's thickness – the longer the channel, the better-ordered the outflow.
Enquiry
Give the hole diameter, the thread or the dimensions of the cabinet – we will reply with a selection and a quote.
B2B shopWe usually reply within 24 working hours.