Honeycomb · AiFO
Honeycomb (730x55x20 mm) grey KP-PLASTER6.2 730x55x20
Item no. KP-PLASTER6.2 · EAN 2010000130049
- used in refrigeration appliances to obtain a laminar air flow
- Material
- polycarbonate
- Colour
- grey
- Hole diameter [mm]
- fi6.0 mm
- dimensions (AxBxC)
- 730x55x20 mm
- temperature range
- -40°C / +110°C
- Hole diameter
- Ø6,0 mm
In brief
- The smallest ready-made element in this group: 730 × 55 × 20 mm.
- A width of 55 mm and a length of 730 mm cannot be obtained from any other strip without cutting.
- Ø6.0 mm perforation, grey colour, polycarbonate material.
- Operating temperature falls in the range from -40°C to +110°C.
Prices and stock levels are in the B2B shop. Honeycomb panels are cut to size, non-standard parts are quoted individually.
Honeycomb (730x55x20 mm) grey KP-PLASTER6.2 730x55x20 – how to choose the right one
KP-PLASTER6.2, in the 730 × 55 × 20 mm version, is a grey, trimmed honeycomb strip made of polycarbonate with Ø6.0 mm holes, designed for narrow air supply gaps in refrigeration equipment.
This is the only item under a metre in length. It works well in small cabinets – bar display cases, display counters, under-counter equipment – where ordering a full sheet would mean buying material only to throw it away.
A large hole on a small area has one more advantage: a short insert won't manage to straighten the airstream much anyway, so there's no reason to restrict the flow with a dense grid.
How to match a drain to the hole and a honeycomb to the cabinet – we explained it in the selection guide for this category.
Where it works
- Bar display cases and small display counters
- Under-counter equipment with a short air curtain
- Repair of a single section without ordering a sheet
- Prototypes and one-off production runs
FAQ
Frequently asked questions
Have not found your answer? Give the hole diameter and the thread – we will select the drain and the trap.
Ask a questionCan this strip be extended?
Two sections can be laid end to end, but a gap in the airstream guiding appears at the joint. For a longer gap, it makes more sense to reach for the 1250 or 1500 mm strip and trim it to size.
Why 55 mm of width specifically?
This is a dimension taken from specific air supply designs and kept as a catalogue item. If your gap has a different dimension, it's simpler to order a cut-to-size piece than to look for a ready-made format.
Enquiry
We will quote Honeycomb (730x55x20 mm) grey KP-PLASTER6.2 730x55x20 for your appliance
Give the hole diameter, the thread or the dimensions of the cabinet – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.