GN container · AiFO
Item no. KZ-GNP16065 · EAN 2010000112113
In brief
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
A polypropylene GN 1/6 container has a footprint of 176 × 162 mm, a depth of 65 mm and a capacity of 1.0 l. With this ratio of width to height, the ingredient lies in a layer rather than a column, so it is easy to pick up with tongs and you can see how much is left.
A litre in a flat vessel cools faster than a litre in a tall one, since the surface releasing heat is larger. For products coming back from hot processing that need to go into the cold room, this difference shortens the time spent passing through the range in which they should not sit.
A shallow GN 1/6 also works well as a display vessel in a counter, the layer is only a few centimetres, so the product is fully visible from above without needing to peer inside.
What the GN sizes mean and how to choose the depth – we explained it in the selection guide for this category.
Where it works
FAQ
Have not found your answer? Give the GN size and the intended use – we will select the containers.
Ask a questionOnly in depth and what follows from it: 65 mm gives 1.0 l, and 100 mm gives 1.6 l, with an identical 176 × 162 mm footprint. The shallower one cools faster and empties more easily, the deeper one needs topping up less often.
Polypropylene withstands frost, so storage at low temperature is not a problem. It is just worth leaving some spare volume, since products with a high water content expand in volume when they freeze.
Empty ones nest inside each other and take up little space on a rack. Stacking full ones needs the KZ-GNP16 lid, without it the edge of the upper container rests on the contents of the lower one.
Enquiry
Give the GN size, the depth and the material – we will reply with a selection and a quote.
B2B shopWe usually reply within 24 working hours.