Technical drawing
GN container · AiFO
Gastronorm container 325x265x40 mm (AISI-304) KZ-GN1204
Item no. AISI-304 · EAN 2010000064597
- STANDARD version made of acid-resistant steel AISI-304 with a sheet thickness of 0.8 mm
- an optimal solution for storing and transporting food
- can be used in convection ovens, refrigerators, bain-maries and heated cabinets
- Material
- AISI-304 acid-resistant steel
- GN size
- GN 1/2
- Version
- rectangular
- Height [mm]
- 40 mm
- Capacity
- 2,5 l
- Dimensions [mm]
- 325x265 mm
- Height
- 40 mm
- Dimensions
- 325x265 mm
In brief
- GN 1/2 format, 40 mm deep and 2.5 l capacity.
- Base 325 × 265 mm, stainless steel, rectangular outline.
- Twice the volume of the 20 mm insert with the same base.
- The same number of litres as the 65 mm high GN 1/3 insert, but spread out flat.
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
Gastronorm container 325x265x40 mm (AISI-304) KZ-GN1204 – how to choose the right one
KZ-GN1204 is a GN 1/2 container measuring 325 × 265 mm and 40 mm high, holding 2.5 l. A shallow insert with a large base: the same two and a half litres as in the narrower GN 1/3 container, but spread in a thin layer instead of piled up.
This difference determines the application. Two and a half litres in a 40 mm layer is a product that's equally accessible everywhere, that heats evenly in the oven and cools just as quickly after removal. A few centimetres of height can change the preparation time more than a change of equipment.
In a combi steam oven, the low wall doesn't shield the product from the air circulation, so the top browns over the whole tray surface, not just in the middle. For baking and browning, this is usually the right choice.
What the GN sizes mean and how to choose the depth – we explained it in the selection guide for this category.
Where it works
- Baking and browning portions in a combi steamer
- Defrosting under controlled conditions when the layer needs to be thin
- Display inserts with a large exposure area
- Preparing and storing delicate salads that must not be compressed
FAQ
Frequently asked questions
Have not found your answer? Give the GN size and the intended use – we will select the containers.
Ask a questionIs it better to choose 2.5 l in GN 1/2 or GN 1/3?
The volume is the same; the shape of the layer differs. GN 1/2 at 40 mm gives flat exposure and faster heat exchange; GN 1/3 at 65 mm gives a narrower strip in the slot and better insulation.
Is this insert suitable for a bain-marie?
For short services, yes, but with a thin layer the product loses moisture quickly. Without a lid or frequent topping up, the top starts to dry out.
How many of these containers fit in a full GN module?
Two, placed side by side along their longer sides. This is the basic split of the grid into halves.
Enquiry
We will quote Gastronorm container 325x265x40 mm (AISI-304) KZ-GN1204 for your appliance
Give the GN size, the depth and the material – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.