Technical drawing
GN container · AiFO
Gastronorm container 354x325x20 mm (AISI-304) KZ-GN2302
Item no. AISI-304 · EAN 2010000064825
- STANDARD version made of acid-resistant steel AISI-304 with a sheet thickness of 0.8 mm
- an optimal solution for storing and transporting food
- can be used in convection ovens, refrigerators, bain-maries and heated cabinets
- Material
- AISI-304 acid-resistant steel
- GN size
- GN 2/3
- Version
- rectangular
- Height [mm]
- 20 mm
- Capacity
- 1,8 l
- Dimensions [mm]
- 354x325 mm
- Height
- 20 mm
- Dimensions
- 354x325 mm
In brief
- The shallowest GN 2/3 insert: 20 mm high and 1.8 l capacity.
- Base 354 × 325 mm made of stainless steel.
- The largest base area among the shallow containers in this group.
- The same outline as the 18-litre insert, at ten times less volume.
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
Gastronorm container 354x325x20 mm (AISI-304) KZ-GN2302 – how to choose the right one
KZ-GN2302 is a GN 2/3 container measuring 354 × 325 mm and just 20 mm high, holding 1.8 l. The largest flat base in this group – a container bought for the surface it offers for spreading product without stacking.
Almost a quarter of a square metre of base with a wall lower than a finger's thickness is a setup that works well for cooling and drying. A thin layer releases heat and moisture evenly, without the cold and hot spots that form in deeper containers.
This format is also sometimes used as a base under other containers: placed underneath, it collects condensation and drips instead of letting them spread over the cold room shelf.
What the GN sizes mean and how to choose the depth – we explained it in the selection guide for this category.
Where it works
- Fast cooling of a thin layer before packaging
- Drying washed herbs and leafy vegetables
- Spreading portions out for individual freezing, without sticking together
- A tray collecting condensation under other containers in the cold room
FAQ
Frequently asked questions
Have not found your answer? Give the GN size and the intended use – we will select the containers.
Ask a questionWhy such a large base with such a low wall?
Because cooling and drying speed is determined by the ratio of surface area to volume. This format performs the best of all in the group here.
Is 1.8 l a realistic usable capacity?
With a 20 mm wall, filling to the rim is theoretical – the product would spill during carrying anyway. It's treated as a single-layer container, not one meant to be filled.
Will this insert fit in a blast chiller?
Usually yes, because these units work on the GN grid. You just need to check whether the runners accept the two-thirds format, not only full modules and halves.
Enquiry
We will quote Gastronorm container 354x325x20 mm (AISI-304) KZ-GN2302 for your appliance
Give the GN size, the depth and the material – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.