Technical drawing
Drain · AiFO
Overflow pipe Ø40 mm (L=180 mm) KZ-Z-180
Item no. KZ-Z-180 · EAN 2010000057001
- made of acid-resistant steel AISI-304
- Material
- stainless steel
- Application
- for 2"
In brief
- KZ-Z overflow pipe with a diameter of Ø40 mm and a length of 180 mm.
- Made of AISI-304 stainless steel.
- The series covers lengths from 180 to 380 mm, so this example opens the range.
- The length is chosen for the water level in the bowl, and the diameter for the drain seat.
Prices and stock levels are in the B2B shop. Sets for fitting out a workstation are quoted individually.
Overflow pipe Ø40 mm (L=180 mm) KZ-Z-180 – how to choose the right one
The KZ-Z-180 overflow pipe has a diameter of Ø40 mm and a length of 180 mm, and is made of AISI-304 stainless steel. It is intended for 2" drains in shallower bowls.
What matters is the level the water should reach: the pipe seated in the drain sets it with its upper edge. So measure from the drain seat in the bottom of the bowl, not the external height of the sink – the worktop, rims and base can add several centimetres.
Stainless steel was chosen with the working environment in mind: constant contact with water, grease and cleaning chemicals. The surface does not absorb deposits, so cleaning comes down to a wipe during periodic dismantling.
How to match a drain to the connection and the way it closes – we explained it in the selection guide for this category.
Where it works
- Shallow bowls around 200 mm deep
- Bowls with a 2" drain designed for an overflow pipe
- Bar stations with a low bowl for rinsing glassware
- Replacing a worn pipe in an existing sink of the same geometry
FAQ
Frequently asked questions
Have not found your answer? Give the connection and the hole in the bowl – we will select the drain and the trap.
Ask a questionHow is the required length measured?
From the drain seat in the bottom of the bowl to the level to which the bowl should be filled. This dimension decides the choice, not the external height of the housing.
What happens if the pipe is too short?
Water will start draining through the overflow before the bowl is filled, so the station loses part of its usable volume. A pipe that is too long, in turn, raises the water level too close to the rim of the bowl.
Will Ø40 mm replace a Ø48 or Ø50 mm pipe?
No. A difference of a few millimetres translates into how tightly it seats, which is why the diameter is read off the component being removed or measured in the seat with a vernier calliper.
Enquiry
We will quote Overflow pipe Ø40 mm (L=180 mm) KZ-Z-180 for your appliance
Give the connection and the diameter of the hole in the bowl – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.