Drain Overflow pipe Ø40 mm (L=330 mm) KZ-Z-330 – AiFO

Technical drawing

Drain · AiFO

Overflow pipe Ø40 mm (L=330 mm) KZ-Z-330

Item no. KZ-Z-330 · EAN 2010000057032

  • made of acid-resistant steel AISI-304
Material
stainless steel
Application
for 2"

In brief

  • A length of 330 mm with a diameter of Ø40 mm, in stainless steel.
  • The second to last item in the KZ-Z series, just before the 380 mm version.
  • It suits bowls with a depth close to 350 mm.
  • With such a large volume of water the role of the overflow grows, because the consequences of overfilling are more serious.
Data sheet PDF, p. 31

Prices and stock levels are in the B2B shop. Sets for fitting out a workstation are quoted individually.

Overflow pipe Ø40 mm (L=330 mm) KZ-Z-330 – how to choose the right one

The KZ-Z-330 overflow pipe has a diameter of Ø40 mm, a length of 330 mm and is made of AISI-304 stainless steel. It is intended for deep bowls holding several dozen litres of water at a time.

On that scale overfilling a bowl is not a puddle but water spilt across the floor around the station. Beyond the clearing up, it means a slippery floor where people walk with hot vessels.

It is worth checking whether the overflow hole in the bowl has a cross-section matching this diameter. An overflow with too little throughput will do its job only if the tap runs more slowly than the pipe can take away.

How to match a drain to the connection and the way it closes – we explained it in the selection guide for this category.

Where it works

  • Bowls around 350 mm deep in pot wash areas
  • Stations for soaking equipment over a longer period
  • Catering kitchens working with large containers
  • Sinks with a bowl filled by a high-output wall-mounted tap

FAQ

Frequently asked questions

Have not found your answer? Give the connection and the hole in the bowl – we will select the drain and the trap.

Ask a question
Will the overflow keep up with a fast-running tap?

Throughput depends on the diameter of the hole and of the pipe itself, so with a high-output tap it may not take away the whole excess. That does not release the staff from watching, but it does give a margin of time to react.

Why should the pipe be steel if it is hidden in the bowl?

Because it works in water with detergent and at a raised temperature for most of the day. Steel does not soften or deform with boiling water, which happens more often with deep bowls.

What should be done when the bowl is 400 mm deep?

The right choice is then the longer 380 mm variant from the same series. A shorter pipe will work, but it will take away a few centimetres of usable depth.

Enquiry

We will quote Overflow pipe Ø40 mm (L=330 mm) KZ-Z-330 for your appliance

Give the connection and the diameter of the hole in the bowl – we will reply with a selection and a quote.

B2B shop

Get in touch

We usually reply within 24 working hours.