Technical drawing
Drain · AiFO
Overflow pipe Ø50 mm (L=165 mm) KZ-165
Item no. KZ-165 · EAN 2010000061930
- made of acid-resistant steel AISI-304
- Material
- stainless steel
- Application
- for 2"
In brief
- Ø50 mm with a length of 165 mm – the shortest overflow pipe in this whole range.
- A component made entirely of AISI-304 stainless steel.
- The Ø50 mm family covers lengths of 165, 180, 230, 280 and 330 mm.
- The designations in this series consist of the number of millimetres alone, with no letter before the number.
Prices and stock levels are in the B2B shop. Sets for fitting out a workstation are quoted individually.
Overflow pipe Ø50 mm (L=165 mm) KZ-165 – how to choose the right one
The KZ-165 overflow pipe has a diameter of Ø50 mm and a length of 165 mm, in AISI-304 stainless steel. It is the shortest component of this type in the range and goes into very shallow bowls or round sinks.
At such a small height the margin for error becomes small. A mistake of two centimetres, almost unnoticeable with a longer pipe, here means that the overflow starts taking water just above the bottom of the bowl.
The codes in this family are formed by the number of millimetres alone, with no letter prefix. When ordering it is worth giving the diameter together with the length, because the value 180 also appears in the Ø40 mm series.
How to match a drain to the connection and the way it closes – we explained it in the selection guide for this category.
Where it works
- Round drop-in sinks with an overflow hole
- Shallow bowls for rinsing glassware and cutlery
- Hand wash basins at service stations
- Bar installations with limited height under the worktop
FAQ
Frequently asked questions
Have not found your answer? Give the connection and the hole in the bowl – we will select the drain and the trap.
Ask a questionWhy does the measurement matter more with a short pipe?
Because an error of a dozen or so millimetres here makes up a significant share of the whole length. The overflow then starts working right at the bottom and the bowl loses its point as a vessel.
How do you know whether a designation refers to this series?
The Ø50 mm codes are the number of millimetres alone, with no letter before the number. The same value can occur in other families, so it is worth describing an order with the diameter.
Is it suitable for a round sink?
Yes, provided the sink has a factory overflow hole with a diameter of Ø50 mm. The short length suits the geometry of such bowls well.
Enquiry
We will quote Overflow pipe Ø50 mm (L=165 mm) KZ-165 for your appliance
Give the connection and the diameter of the hole in the bowl – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.