Technical drawing
Cold room hinge · AiFO
Rising hinge ZK-2910RV
Item no. ZK-2910RV · EAN 2010000149102
- made of composite
- galvanised steel pin
- interchangeable for left/right doors
- depth adjustment ± 2.5 mm, in the RV version also vertical adjustment 24 mm
- Hinge version
- rising
- for doors of thickness
- 55-152 mm
- maximum door weight
- 80 kg
- door offset
- 55-66 mm, 1 spacer: 65-86 mm
In brief
- The smallest door offset in the 29xx series: 55-66 mm, with one spacer 65-86 mm.
- A very wide panel thickness range: from 55 to 152 mm.
- The rising version, with 24 mm vertical adjustment in the RV version.
- Doors up to 80 kg, composite body.
Prices and stock levels are in the B2B shop. Sets of cold room fittings are put together to order.
Rising hinge ZK-2910RV – how to choose the right one
The ZK-2910RV is a rising hinge for cold room doors weighing up to 80 kg, covering panels from 55 all the way to 152 mm. What sets it apart in this series is the smallest door offset - 55 to 66 mm, and with one spacer 65 to 86 mm.
The offset decides how far the leaf sits away from the plane of the frame. The smallest figure in the family means a door set closest to the wall, which matters where there is not enough room in front of the chamber for a full opening.
Vertical adjustment in this series reaches twenty-four millimetres, three times more than in the 2830 family. This is a hinge for installations where the mounting height genuinely needs correcting.
How to match the fittings to the panel thickness and the weight of the door – we explained it in the selection guide for this category.
Where it works
- Chambers set up in tight technical rooms
- Doors set close to the plane of the wall
- Fit-outs with a very varied range of panel thicknesses
- Installations needing a large height-correction range
FAQ
Frequently asked questions
Have not found your answer? Give the panel thickness and the door dimensions – we will select a complete set of fittings.
Ask a questionWhat is door offset, and why does it differ between models?
It is the distance the hinge sets the leaf back from the frame. The 29xx series offers three levels: 55-66, 67-90 and 78-112 mm, so the choice depends on the fit-out's construction, not the door's weight.
How does 24 mm vertical adjustment differ from the 2830 series?
In the 2830 family, vertical adjustment is described as +8/-0 mm, meaning upward only and within a narrow range. Here the manufacturer gives twenty-four millimetres, which allows much more room for manoeuvre when setting the leaf.
Enquiry
We will quote Rising hinge ZK-2910RV for your appliance
Give the panel thickness, the door dimensions and the type of cold room – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.