Technical drawing
Draw-off and column taps · AiFO
Deck-mounted column tap with a mixer AG-P203
Item no. AG-P203 · EAN 2010000056585
- self-lubricating, non-seizing valve cartridges
- chrome-plated steel knobs
- swivel spout
- water flow from 92l/min to 104l/min at a pressure of 3 to 5 bar
- mounting hole Ø46 mm
In brief
- A 200 mm spout as in AG-P202, but a column 100 mm taller.
- The height given in the designation: H = 550 mm.
- Mixer, 3/4" connection, Ø46 mm drilling.
- Declared flow 92–104 l/min at 3–5 bar.
Prices and stock levels are in the B2B shop. When fitting out a whole back-of-house we quote the complete set.
Column tap with a mixer (spout L= 200 mm, H=550 mm, 3/4") AG-P203 – how to choose the right one
The AG-P203 deck-mounted column tap with a mixer has a 550 mm column and a 200 mm spout, works on a 3/4" thread and sits in a Ø46 mm hole. The catalogue output falls between 92 and 104 l/min at a pressure of 3–5 bar.
In this range the height is a parameter independent of the reach, which is why a version that is both tall and short exists. It is chosen where a tall vessel goes under the stream but stands close to the column rather than to one side.
A hundred millimetres vertically compared with the 450 mm version translates into space under the spout. The data sheet does not give this clearance directly, only the overall height, so with a vessel of borderline size it is worth asking for a technical drawing.
How to match the tap to the station, the connection and the flow required – we explained it in the selection guide for this category.
Where it works
- Tall buckets and containers placed right by the column
- Stations with no fittings above the worktop
- Vessels of small diameter but great height
- Replacing a tap under which a pot would not fit
FAQ
Frequently asked questions
Have not found your answer? Give the station, the connection and what it is for – we will select the tapware.
Ask a questionWhat exactly does H = 550 mm mean?
It is the height of the tap given by the manufacturer in the model designation. The gap between the worktop and the spout will be smaller and has not been itemised in the data sheet.
Why does a tall tap have a short spout?
Because the two dimensions are selected separately. The range covers all combinations of three heights and three reaches, so one dimension does not dictate the other.
Enquiry
We will quote Column tap with a mixer (spout L= 200 mm, H=550 mm, 3/4") AG-P203 for your appliance
Give the mounting, the connection and what the station is for – we will reply with a selection and a quote.
B2B shopGet in touch
We usually reply within 24 working hours.